Aerospace-VINTEKO

Core Application Scenarios

VINTEKO servo press systems are designed to control, monitor, and optimize the demands of refined and intelligent pressing operations. They are widely adopted by automotive component manufacturers. The system provides comprehensive quality and process reliability assurance for production phases. Through real-time closed-loop process control, it continuously monitors production status, effectively enhances production cycle time while suppressing burr formation, and reduces defect rates at the source.

Bearing/Bushing Pressing
the Connecting Rod Bushing

The VINTEKO servo presses do more than just “push in” bearings or bushings; they create a perfectly fitted interface that meets all design functions under controlled, monitored, and traceable conditions.

Press-fitting of precision components for fuel nozzles

VINTEKO servo presses can achieve ±0.01mm displacement and ±0.5% pressure control in the press-fitting of fuel nozzles, ensuring consistent assembly parameters for each workpiece, reducing scrap rate, rework rate, and subsequent failures, and achieving long-term production cost savings.

Crimping of Connectors

VINTEKO servo press is used for crimping terminals of high-frequency, high-current aviation connectors, ensuring stable and reliable contact resistance and meeting strict signal integrity requirements.

Press-fitting of hinges and bearings for the actuators of the cabin door and landing gear

The VINTEKO servo press ensures high smoothness and zero play of moving parts during the pressing of hinges and bearings, which is crucial for safety.

Technical Advantages

Quality Improvement

Process Optimization

Reduce waste loss

Reduce rework costs

Increase equipment utilization

Quality Improvement

Transition from post-event inspection to in-process prevention, using real-time curve monitoring to intercept defects.

Process Optimization

By analyzing the press-fitting curve data, the optimal assembly parameters can be determined.

Reduce waste loss

Protect valuable aerospace-grade material parts from damage during the assembly process.

Reduce rework costs

Avoid costly disassembly and rework at higher-value assembly stages.

Increase equipment utilization

VINTEKO servo pressing can replace multiple single-function specialized pressure machines.

Practical Application Results

A Motor Factory

VINTEKO Servo Pressing Process

±0.5% Precision

Assembly accuracy is stably controlled within ±0.5%

100% Data Traceability

Achieve 100% data traceability in the assembly process of key components through the servo pressing process

30% Extended lifespan

Structural component fatigue life increased by over 30%